Skip to main content

Energy costs of running UV disinfection systems are one of the biggest expenditures of a wastewater treatment works, accounting for up to 25% of the total energy usage.

Low pressure UV systems have been around for over twenty years but tend to be restricted to works where the volume of water treated is less than 20Ml/day as they are usually made up of a large number of low power (<100W) lamps emitting UV wavelengths at 254nm.  The bigger the flow, the larger number of lamps needed.  The challenge in such circumstances is the balance between energy costs and effective disinfection, proper control of such systems is critical.

Controlling energy usage in a UV system is dependent upon flow rate, lamp power and UV transmittance (UVT) of the water being subjected to the UV light.

UVT will vary over time and is dependent upon the concentration of organic material as well as the turbidity of the water.  The more organics and the higher the turbidity, the more time the lamps will need to be on in order to provide a sufficient dose of UV light to the water.  The more UV light absorbed, the lower the UVT. The UVT measurement is carried out by measuring the ratio of emitted light (usually at 254nm) to that received by a detector after the light has passed through the water sample and is usually characterised as a percentage (%UVT).

Using smart technology to ensure optimisation of UV disinfection systems.

i::scan sensors

The i::scan from PMA enables operators to effectively monitor the UVT of the water being treated thus optimising the lamp power usage and ultimately reducing the energy used in the plant. Not only is the i::scan affordable and accurate, it also comes with the added feature of integrated ISO 7027 compliant turbidity measurement, enabling suspended solids to be quantified so operators can determine where why changes in % UVT are occurring.

Close Menu

Talk to us

Call us on 01484 843 708

E-mail us

You can also contact us directly at [email protected]

Write to us

Process Measurement and Analysis Ltd, Brook Mills House, Carr Lane, Slaithwaite, Huddersfield, HD7 5BG United Kingdom